[Contribution to a book, Contribution to a conference proceedings]
Towards crack-free ablation cutting of thin glass sheets with picosecond pulsed lasers
In: Pacific Rim Laser Damage 2017-Optical Materials for High Power Lasers, 2017
[DOI: 10.1117/12.2272120]

Sun, Mingying
Schulz, Wolfgang
Eppelt, Urs
Hartmann, Claudia
Lin, Zunqi
et al.

[Dissertation / PhD Thesis]
Realisierung eines hochauflösenden EUV-Mikroskops mit einer optimierten Gasentladungsquelle zum Betrieb mit Wellenlängen um 17 nm zur Mikroskopie an M-Kanten von Elementen, 2017

Freiberger, Ralf

[Book, Dissertation / PhD Thesis]
Korrelation der High Power SLM-Prozessführung mit der Produktivität, Effizienz und den Materialeigenschaften für den Werkstoff Inconel 718, 2017

Bremen, Sebastian Wilhelm

[Journal Article]
On the interplay of morphology and electronic conductivity of rotationally spun carbon fiber mats
In: Journal of applied physics, 122 (10), 105104, 2017
[DOI: 10.1063/1.5001509]

Opitz, Martin
Go, Dennis
Lott, Philipp
Müller, Sandra
Stollenwerk, Jochen Hugo
et al.

[Journal Article]
Fast identification of steel bloom composition at a rolling mill by laser-induced breakdown spectroscopy
In: Spectrochimica acta / B, 136, 66-72, 2017
[DOI: 10.1016/j.sab.2017.08.009]

Sturm, Volker
Meinhardt, Christoph
Fleige, Rüdiger
Fricke-Begemann, Cord
Eisbach, Jens

[Journal Article]
Case Studies on Local Reinforcement of Sheet Metal Components by Laser Additive Manufacturing
In: Metals, 7 (4), 113, 2017
[DOI: 10.3390/met7040113]

Bambach, Markus
Sviridov, Alexander
Weisheit, Andreas
Schleifenbaum, Henrich

[Contribution to a book, Contribution to a conference proceedings]
kW-class direct diode laser for sheet metal cutting based on commercial pump modules
In: High-Power Diode Laser Technology XV, 2017
[DOI: 10.1117/12.2252145]

Witte, Ulrich
Schneider, F.
Holly, Carlo
Di Meo, Angelo
Rubel, D.
et al.

[Contribution to a book, Contribution to a conference proceedings]
Ermittlung der Montagereihenfolge für Präzisionsoptiken
In: [118. Jahrestagung der DGaO, 2017-06-06 - 2017-06-10, Dresden, Germany], 2017

Holters, Martin
Stollenwerk, Jochen Hugo
Loosen, Peter

[Journal Article]
Quality improvement of copper welds by laser microwelding with the usage of spatial power modulation
In: Journal of laser applications, 29 (2), 022422, 2017
[DOI: 10.2351/1.4983505]

Häusler, A.
Schurmann, Annette
Schöler, C.
Olowinsky, Alexander
Gillner, Arnold
et al.

[Journal Article]
Glass-ceramic coating material for the CO2 laser based sintering of thin films as caries and erosion protection
In: Dental materials, 33 (9), 995-1003, 2017
[DOI: 10.1016/j.dental.2017.06.008]

Bilandzic, Marin Dean
Wollgarten, Susanne
Stollenwerk, Jochen
Poprawe, Reinhart
Esteves Oliveira, Marcella
et al.

[Journal Article]
Growing of bulk sapphire single crystals using laser material deposition
In: Journal of laser applications, 29 (2), 022013, 2017
[DOI: 10.2351/1.4983638]

Wilms, M. B.
Biermann, Tim
Rolink, Gesa
Weisheit, Andreas
Poprawe, Reinhart

[Contribution to a book, Contribution to a conference proceedings]
Throughput scaling by spatial beam shaping and dynamic focusing
In: Laser Applications in Microelectronic and Optoelectronic Manufacturing (LAMOM) XXII / edited by Beat Neuenschwander, 2017
[DOI: 10.1117/12.2256228]

Kumkar, M.
Kaiser, M.
Kleiner, J.
Flamm, D.
Grossmann, D.
et al.

[Journal Article]
Influence of additive multilayer feature on thermodynamics, stress and microstructure development during laser 3D printing of aluminum-based material
In: Science bulletin, 62 (11), 779-787, 2017
[DOI: 10.1016/j.scib.2017.05.007]

Dai, Donghua
Gu, Dongdong
Poprawe, Reinhart
Xia, Mujian

[Journal Article]
Novel process for butt-joined plastic-metal hybrid compounds
In: Journal of laser applications, 29 (2), 022416, 2017
[DOI: 10.2351/1.4983516]

Engelmann, Christoph
Oster, Lukas
Olowinsky, Alexander
Gillner, Arnold
Mamuschkin, Viktor
et al.

[Contribution to a conference proceedings]
Rapid nanostructuring using multi-beam-interference with consecutively overlapped ultrashort laser pulses
In: [18th International Syposium on Laser Precision Microfabrication, LPM 2017, 2017-06-05 - 2017-06-08, Toyama, Japan], 2017

He, Chao
Steger, Michael
Gillner, Arnold

[Contribution to a conference proceedings]
Ultrafast laser helical drilling of three-dimensional shaped holes using sychronized adaptation of energy deposition
In: [18th International Syposium on Laser Precision Microfabrication, LPM 2017, 2017-06-05 - 2017-06-08, Toyama, Japan], 2017

He, Chao
Bühring, Jan
Zibner, Frank
Gillner, Arnold

[Contribution to a book, Contribution to a conference proceedings]
Approach towards the Digital Optical Twin
In: Optical Fabrication and Testing : part of Optical Design and Fabrication : 9-13 July 2017, Denver, Colorado, United States / OSA - The Optical Society, 2017
[DOI: 10.1364/IODC.2017.ITh3A.1]

Prochnau, Marcel Sebastian
Stollenwerk, Jochen Hugo
Loosen, Peter

[Contribution to a book, Contribution to a conference proceedings]
Combination of Laser-based Process Steps for Optics Manufacturing
In: Optical Fabrication and Testing : part of Optical Design and Fabrication : 9-13 July 2017, Denver, Colorado, United States / OSA - The Optical Society, 2017
[DOI: 10.1364/OFT.2017.OTu3B.6]

Weingarten, Christian
Braun, Karsten
Willenborg, Edgar

[Contribution to a book]
Multi-technology products
In: Integrative Production Technology - Theory and Applications / Christian Brecher, Denis Özdemir Editors, 2017
[DOI: 10.1007/978-3-319-47452-6_7]

Bobzin, Kirsten
Hopmann, Christian
Loosen, Peter
Poprawe, Reinhart
Öte, Mehmet
et al.

[Journal Article]
Analysis of track formation during laser metal deposition
In: Journal of laser applications, 29 (2), 022506, 2017
[DOI: 10.2351/1.4983231]

Pirch, N.
Linnenbrink, S.
Gasser, Andres
Wissenbach, K.
Poprawe, Reinhart

[Journal Article]
Koaxiale Laserstrahlformung für die Lasermaterial-Bearbeitung mit Zusatzwerkstoff
In: Photonik, 2017 (3), 80-83, 2017

Pütsch, Oliver
Kelbassa, Jana
Stollenwerk, Jochen Hugo
Gasser, Andres
Loosen, Peter

[Journal Article]
Laser-based functionalization of electronic multi-material-layers for embedded sensors
In: Journal of laser applications : JLA, 29 (2), 022603, 2017
[DOI: 10.2351/1.4983267]

Vedder, Christian
Wollgarten, Susanne
Gradmann, Rena
Stollenwerk, Jochen
Wissenbach, Konrad
et al.

[Journal Article]
Advanced trim-cut technique to visualize melt flow dynamics inside laser cutting kerfs
In: Journal of laser applications : JLA, 29 (2), 022213, 2017
[DOI: 10.2351/1.4983261]

Arntz, Dennis
Petring, Dirk
Jansen, Ulrich
Poprawe, Reinhart

[Contribution to a book, Contribution to a conference proceedings]
Integrated optical design for highly dynamic laser beam shaping with membrane deformable mirrors
In: Laser Resonators, Microresonators, and Beam Control XIX : 30 January-2 February 2017, San Francisco, California, United States / Alexis V. Kudryashov, Alan H. Paxton, Vladimir S. Ilchenko (editors) ; sponsored and published by SPIE, 2017
[DOI: 10.1117/12.2256127]

Pütsch, Oliver
Stollenwerk, Jochen Hugo
Loosen, Peter

[Journal Article]
Glass processing with pulsed CO_2 laser radiation
In: Applied optics, 56 (4), 777-783, 2017
[DOI: 10.1364/AO.56.000777]

Weingarten, Christian
Uluz, Emrah
Schmickler, Andreas
Braun, Karsten
Willenborg, Edgar
et al.

[Journal Article]
Evolution of energy deposition during glass cutting with pulsed femtosecond laser radiation
In: Applied physics / A, 123 (5), 376, 2017
[DOI: 10.1007/s00339-017-1000-8]

Kalupka, Christian
Grossmann, Daniel
Reininghaus, Martin

[Contribution to a book]
Self-optimizing Production Systems
In: Integrative production technology : theory and applications / Christian Brecher, Denis Özdemir, editors, 2017

Schlick, Christopher
Schuh, Günther
Klocke, Fritz
Schmitt, Robert Heinrich
Abel, Dirk
et al.

[Book, Dissertation / PhD Thesis]
Mehrstrahlinterferenz zur direkten, großflächigen Nanostrukturierung durch Laserablation, 2017

Steger, Michael

[Contribution to a book]
Self-optimizing Production Technologies
In: Integrative production technology : theory and applications / Christian Brecher, Denis Özdemir, editors, 2017
[DOI: 10.1007/978-3-319-47452-6_9]

Klocke, Fritz
Abel, Dirk
Gries, Thomas
Hopmann, Christian
Loosen, Peter
et al.

[Journal Article]
Konzept zur Bearbeitung und tribologischen Prüfung von Fließpressmatrizen für das Trockenumformen von Aluminium
In: Dry metal forming open access journal, 3, 073-080, 2017

Teller, Marco
Hirt, Gerhard Kurt Peter
Roß, Ingo
Temmler, André
Poprawe, Reinhart
et al.

[Dissertation / PhD Thesis]
Laserinduzierte Ablation von biologischem Hartgewebe unter Wasser mit Pikosekundenpulsen im sichtbaren Spektralbereich, 2017

Tulea, Cristian-Alexander

[Journal Article]
Combining thermodynamic modeling and 3D printing of elemental powder blends for high-throughput investigation of high-entropy alloys - Towards rapid alloy screening and design
In: Materials science and engineering / A, 688, 180-189, 2017
[DOI: 10.1016/j.msea.2017.01.099]

Haase, Christian
Tang, Florian
Wilms, Markus B.
Weisheit, Andreas
Hallstedt, Bengt

[Contribution to a conference proceedings, Journal Article]
Laser Beam Microwelding of Lithium-ion Battery Cells with Copper Connectors for Electrical Connections in Energy Storage Devices
In: Lasers in engineering : LIE, 36 (1/3), 147-167, 2017

Heinen, Paul
Häusler, André
Mehlmann, B.
Olowinsky, A.

[Contribution to a conference proceedings, Journal Article]
Efficient Copper Microwelding with Fibre Lasers using Spatial Power Modulation
In: Lasers in engineering : LIE, 36 (1/3), 133-146, 2017

Häusler, André
Mehlmann, B.
Olowinsky, A.
Gillner, Arnold
Poprawe, Reinhart

[Contribution to a book, Journal Article]
Improving the laser cutting process design by machine learning techniques
In: Production engineering, 11 (2), 195-203, 2017
[DOI: 10.1007/s11740-017-0718-7]

Tercan, Hasan
Al Khawli, Toufik
Eppelt, Urs
Büscher, Christian
Meisen, Tobias
et al.

[Journal Article]
Microstructure and physical performance of laser-induction nanocrystals modified high-entropy alloy composites on titanium alloy
In: Materials and design, 117, 363-370, 2017
[DOI: 10.1016/j.matdes.2016.12.007]

Li, Jianing
Craeghs, Werner
Jing, Cainian
Gong, Shuili
Shan, Feihu

[Journal Article]
Laser polishing and laser shape correction of optical glass
In: Journal of laser applications : JLA, 29 (1), 011702, 2017
[DOI: 10.2351/1.4974905]

Weingarten, Christian
Schmickler, Andreas
Willenborg, Edgar
Wissenbach, Konrad
Poprawe, Reinhart

[Journal Article]
Surface structuring by laser remelting of metals
In: Journal of laser applications : JLA, 29 (1), UNSP 012015, 2017
[DOI: 10.2351/1.4972414]

Temmler, André
Küpper, M.
Walochnik, Martin A.
Lanfermann, A.
Schmickler, T.
et al.

[Contribution to a book]
Scientific Cooperation Engineering
In: Integrative Production Technology - Theory and Applications / Christian Brecher, Denis Özdemir Editors, 2017
[DOI: 10.1007/978-3-319-47452-6_11]

Jeschke, Sabina
Bleck, Wolfgang
Richert, Anja Simone
Schuh, Günther
Schulz, Wolfgang
et al.

[Journal Article]
Exploiting Process-Related Advantages of Selective Laser Melting for the Production of High-Manganese Steel
In: Materials, 10 (1), 56, 2017
[DOI: 10.3390/ma10010056]

Haase, Christian
Bültmann, Jan
Hof, Jan
Ziegler, Stephan
Bremen, Sebastian
et al.

[Journal Article]
Combinatorial Alloy Design by Laser Additive Manufacturing
In: Steel research international, 88 (8), 1-11, 2017
[DOI: 10.1002/srin.201600416]

Knoll, Helene
Ocylok, Sörn
Weisheit, Andreas
Springer, Hauke
Jägle, Eric
et al.

[Contribution to a book]
Additive Fertigung "Vom Pulver zum Fertigteil"
In: Ressourceneffizienz : Schlüsseltechnologien für Wirtschaft und Gesellschaft / Reimund Neugebauer, 2017

Alkhayat, Moritz
Gasser, Andres
Arntz, Kristian
Klingbeil, Nils
Vollmer, Thomas

[Journal Article]
Influence of different zinc coatings on laser brazing of galvanized steel
In: Journal of materials processing technology, 239, 75-82, 2017
[DOI: 10.1016/j.jmatprotec.2016.08.004]

Reimann, Wilfried
Pfriem, Simon
Hammer, Thorge
Päthe, Dieter
Ungers, Michael
et al.

[Contribution to a book, Contribution to a conference proceedings]
A fast method for automated calibration of heat sources
In: Mathematical modelling of weld phenomena 11 : contains the papers presented at the 11th International Seminar 'Numerical Analysis of Weldability', held from September 27 to 30, 2015 at Schloss Seggau near Graz, Austria / edited by Christof Sommitsch (Institute of Materials Science and Welding, Graz University of Technology), Norbert Enzinger (Institute of Materials Science and Welding, Graz University of Technology), Peter Mayr (Institute of Joining and Assembly, Technische Universität Chemnitz) ; TU Graz, Graz University of Technology, 2016

Schöler, Christoph
Nießen, Markus
Jansen, Ulrich
Schulz, Wolfgang

[Contribution to a conference proceedings]
FULAS: High Energy Laser Source for Future LIDARApplications
In: [International Conference on Space Optics, ICSO 2016, 2016-10-18 - 2016-10-21, Biarritz, France], 2016

Hahn, Sven
Bode, M.
Luttmann, Jörg
Hoffmann, Hans-Dieter

[Contribution to a conference proceedings]
Laser module based on monolithically integrated MOPAs at 1.5 μm for space-borne lidar applications
In: [International Conference on Space Optics, ICSO 2016, 2016-10-18 - 2016-10-21, Biarritz, France], 2016

Faugeron, M.
Klein, Sarah
Vilera, M.
Kochem, Gerd
Pérez-Serrano, Antonio
et al.

[Abstract, Contribution to a conference proceedings, Journal Article]
Microstructure and properties of WE43 manufactured via SLM
In: European cells & materials, 32 (Supplement 6), 6-6, 2016

Zumdick, Naemi Aimee
Jauer, L.
Kersting, L. C.
Meiners, W.
Kutz, Tatiana
et al.

[Dissertation / PhD Thesis]
Digital photonic production of corundum components by SLE, 2016

Hörstmann-Jungemann, Maren

[Book, Dissertation / PhD Thesis]
Entwicklung der laserbasierten additiven Fertigung für intermetallische Fe-Al-Legierungen, 2016

Rolink, Gesa

[Contribution to a book]
Cognition-Enhanced, Self-optimizing Assembly Systems
In: Integrative production technology : theory and applications / Christian Brecher, Denis Özdemir, editors, 2016
[DOI: 10.1007/978-3-319-47452-6_10]

Schmitt, Robert Heinrich
Corves, Burkhard
Loosen, Peter
Brecher, Christian
Jeschke, Sabina
et al.